{"title":"Modules","description":"\u003cp\u003eBrowse our Modules collection. New Arrival.\u003c\/p\u003e","products":[{"product_id":"fermion-voice-recorder-module-breakout","title":"Fermion: Voice Recorder Module (Breakout)","description":"\u003cdiv class=\"desc\"\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cp style=\"text-align: left;\"\u003eWanna buy a simple \u0026amp; practical voice recorder? This one is right for you! The voice recorder module supports 4 controlling modes (Arduino, AT command, on-board buttons, and ADKEY), and multi-segment voice recording.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eYou can directly press the onboard buttons to record or play voice without using a controller.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eMoreover, the 16MB storage on the module can store up to 40 minutes of voice recording and the recorded files can be copied to your computer via the type-C interface.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupport about 40 minutes voice recording\u003c\/li\u003e\n\u003cli\u003eSupport multi-segment voice recording\u003c\/li\u003e\n\u003cli\u003eVoice recording\/playing via onboard buttons\u003c\/li\u003e\n\u003cli\u003eOn-board power amplifier\u003c\/li\u003e\n\u003cli\u003eSupport analogue U-disk \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eDIY Plush Toys\u003c\/li\u003e\n\u003cli\u003eHandmade Personalized Gift\u003c\/li\u003e\n\u003cli\u003eEvent Voice Memo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 3.3~5V\u003c\/li\u003e\n\u003cli\u003eOperating Current: \u0026gt;10mA\u003c\/li\u003e\n\u003cli\u003eStorage: 16MB\u003c\/li\u003e\n\u003cli\u003eSampling Rate: 48kbs\u003c\/li\u003e\n\u003cli\u003eCommunication: UART\u003c\/li\u003e\n\u003cli\u003eDimension: 26*30mm\/1.02*1.18”\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eDocuments\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cli\u003eProduct wiki\u003c\/li\u003e\n\u003c\/div\u003e\n\u003ch2\u003eShipping List\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cli\u003eVoice Recorder Module-Breakout x1\u003c\/li\u003e\n\u003cli\u003e2.54-6P Single-Row-Pin Black x2\u003c\/li\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":53636180934949,"sku":"qzl1787258156756","price":4.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/6251\/1397\/files\/fermion-voice-recorder-module-breakout_1.jpg?v=1787258165"},{"product_id":"panel-mount-ultrasonic-sonar-ranging-module-with-uart-output","title":"Panel Mount Ultrasonic (Sonar) Ranging Module with UART Output","description":"\u003cp\u003eThis sleek-looking 'button' is actually an ultrasonic sensor, ready for panel mount use. Inside is a module that uses high-frequency signals to determine distance to a surface. It's elegant looking and is more durable than the 'raw' ultrasonics we sell a lot of, so it would do well in a garage, robot or installation where you want a durable dust and weather-resistant design. It has a range of 28 cm to 450 cm with a read resolution of 1mm (precision is 1 cm).\u003c\/p\u003e\n\u003cp\u003eThis sensor has UART output, so it can connect to a microcontroller or microcomputer with a TTL serial port. You can also connect it to a computer using a USB-to-serial adapter and read data from the operating system's COM or serial port device.\u003c\/p\u003e\n\u003cp\u003eIt comes with a 2mm pitch connector you can cut off or re-purpose. To use, simply connect the red wire #1 to 5V, black wire #2 to ground, skip #3 and connect #4 to your serial input pin and read the data in at 9600 baud. Check out our Arduino and Python example code to get readings in a jiffy!\u003c\/p\u003e\n\u003cp\u003eThis sensor has a 'blind' zone distance of 0 to 28 cm, that means\u003cem\u003e it can't accurately tell when something is less than that distance away\u003c\/em\u003e. it's best used when you know that the object you're sensing is at least 30 cm from the sensor!\u003c\/p\u003e\n\u003cp\u003eWe carry a large variety of distance sensors here if this fellow isn't what you're looking for.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cul id=\"product-files\"\u003e\n\u003cli\u003eOperating Voltage: 5V\u003c\/li\u003e\n\u003cli\u003eAverage Current Draw : ≤ 8mA\u003c\/li\u003e\n\u003cli\u003ePeak Current Draw: ≤ 50mA\u003c\/li\u003e\n\u003cli\u003eBlind Zone Distance: 0 ~ 28cm\u003c\/li\u003e\n\u003cli\u003eRanging Distance for Flat Object: 28 ~ 450cm\u003c\/li\u003e\n\u003cli\u003ePrecision: ±1cm + 0.5%\u003c\/li\u003e\n\u003cli\u003eOutput: TTL Serial 9600 baud\u003c\/li\u003e\n\u003cli\u003eResponse Time: 100ms\u003c\/li\u003e\n\u003cli\u003eSonar Center Frequency: 40KHz ±1.0KHz\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -15 ~ 60 degrees C at \u0026lt;80% humidity\u003c\/li\u003e\n\u003cli\u003eStorage Temperature: -25 ~ 80 degrees C at \u0026lt;90% humidity\u003c\/li\u003e\n\u003cli\u003eSensing Angle: 50°\u003c\/li\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003cli\u003eDiagram\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":53636180967717,"sku":"ofx1787258158940","price":8.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/6251\/1397\/files\/panel-mount-ultrasonic-sonar-ranging-module-with-uart-output_1.jpg?v=1787258167"},{"product_id":"esp32-s2-wrover-i-module-with-ufl-4-mb-flash-and-2-mb-psram-discontinued","title":"ESP32-S2-WROVER-I Module with uFL - 4 MB flash and 2 MB PSRAM [Discontinued]","description":"\u003cp\u003eThe ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Then the ESP32 came out with tons of pins, Bluetooth support, and dual 240 MHz cores. Now get ready to take your IoT designs to the next level with the \u003cstrong\u003eESP32-S2-WROVER-1 WiFi Module!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ESP32-S2 is a highly-integrated, low-power, 2.4 GHz Wi-Fi System-on-Chip (SoC) solution that now has \u003cstrong\u003ebuilt-in native USB\u003c\/strong\u003e as well as some other interesting new technologies like Time of Flight distance measurements. With its state-of-the-art power and RF performance, this SoC is an ideal choice for a wide variety of application scenarios relating to the Internet of Things (IoT), wearable electronics, and smart homes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note \u003c\/strong\u003ethis is a single-core 240 MHz chip so it won't be as fast as ESP32's with dual-core. Also, there is no Bluetooth support. However, we are super excited about the ESP32-S2's native USB which unlocks a lot of capabilities for advanced interfacing! This WROVER module comes with 4 MB flash and 2 MB PSRAM. This version has a uFL connector for adding an external antenna, we also have a version with a built-in antenna\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor advanced users only! This product is just the module - which can be difficult to use. \u003c\/strong\u003eYou'll need to solder it onto a board with supporting circuitry. This module is for developers at this time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note\u003c\/strong\u003e this product is for people who are comfortable compiling via the ESP IDF toolchain. There are the \u003cem\u003ebeginnings \u003c\/em\u003eof an Arduino IDE setup and a CircuitPython port. We are providing these for the community of advanced hackers, coders, and makers who are willing to help make demos, projects, and tutorials for the ESP32-S2!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003e\u003cstrong\u003eMCU\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eESP32-S2 embedded, Xtensa® single-core 32-bit LX7 microprocessor, up to 240 MHz\u003c\/li\u003e\n\u003cli\u003e128 KB ROM\u003c\/li\u003e\n\u003cli\u003e320 KB SRAM\u003c\/li\u003e\n\u003cli\u003e16 KB SRAM in RTC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWi-Fi\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e802.11 b\/g\/n\u003c\/li\u003e\n\u003cli\u003eBit rate: 802.11n up to 150 Mbps\u003c\/li\u003e\n\u003cli\u003eA-MPDU and A-MSDU aggregation\u003c\/li\u003e\n\u003cli\u003e0.4 μs guard interval support\u003c\/li\u003e\n\u003cli\u003eCenter frequency range of operating channel: 2412 ~ 2484 MHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHardware\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInterfaces: GPIO, SPI, LCD, UART, I2C, I2S, Camera interface, IR, pulse counter, LED PWM, USB 1.1 OTG, ADC, DAC, touch sensor, temperature sensor\u003c\/li\u003e\n\u003cli\u003e40 MHz crystal oscillator\u003c\/li\u003e\n\u003cli\u003e4 MB SPI flash\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e2 MB PSRAM\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOperating voltage\/Power supply: 3.0 ~ 3.6 V\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: –40 ~ 85 °C\u003c\/li\u003e\n\u003cli\u003eDimensions: (18 × 31 × 3.3) mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCertification and Test\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGreen certification: RoHS\/REACH\u003c\/li\u003e\n\u003cli\u003eRF certification: FCC\/CE-RED\/SRRC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHuuuuge amount of information on https:\/\/www.esp32.com\/ community forum!\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eDon't forget to visit esp32.com for the latest and greatest in ESP32 news, software, and gossip!\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\n\u003cli\u003eModule Datasheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Espressif","offers":[{"title":"Default Title","offer_id":53636181000485,"sku":"ysb1787258160215","price":2.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/6251\/1397\/files\/esp32-s2-wrover-i-module-with-ufl---4-mb-flash-and-2-mb-psram-discontinued_1.jpg?v=1787258169"},{"product_id":"esp32-s2-wroom-module-with-pcb-antenna-4-mb-flash-and-no-psram-4mb-flash","title":"ESP32-S2 WROOM Module with PCB Antenna - 4 MB flash and no PSRAM (4MB Flash)","description":"\u003cp\u003eThe ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Then the ESP32 came out with tons of pins, Bluetooth support, and dual 240 MHz cores. Now get ready to take your IoT designs to the next level with the \u003cstrong\u003eESP32-S2-WROOM WiFi Module!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ESP32-S2 is a highly-integrated, low-power, 2.4 GHz Wi-Fi System-on-Chip (SoC) solution that now has \u003cstrong\u003ebuilt-in native USB\u003c\/strong\u003e as well as some other interesting new technologies like Time of Flight distance measurements. With its state-of-the-art power and RF performance, this SoC is an ideal choice for a wide variety of application scenarios relating to the Internet of Things (IoT), wearable electronics, and smart homes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note \u003c\/strong\u003ethis is a single-core 240 MHz chip so it won't be as fast as ESP32's with dual-core. Also, there is no Bluetooth support. However, we are super excited about the ESP32-S2's native USB which unlocks a lot of capabilities for advanced interfacing! This WROOM module comes with 4 MB flash and \u003cem\u003edoes not contain any PSRAM\u003c\/em\u003e. This version has a built-in antenna, if you need an external antenna we have the WROVER (PSRAM) version with a uFL connector version which can be used with an external antenna.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor advanced users only! This product is just the module - which can be difficult to use. \u003c\/strong\u003eYou'll need to solder it onto a board with supporting circuitry. This module is for developers at this time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note\u003c\/strong\u003e this product is for people who are comfortable compiling via the ESP IDF toolchain. There are the \u003cem\u003ebeginnings \u003c\/em\u003eof an Arduino IDE setup and a CircuitPython port. We are providing these for the community of advanced hackers, coders, and makers who are willing to help make demos, projects, and tutorials for the ESP32-S2!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMCU:\n\u003cul\u003e\n\u003cli\u003eESP32-S2 embedded, Xtensa® single-core 32-bit\u003c\/li\u003e\n\u003cli\u003eLX7 microprocessor, up to 240 MHz\u003c\/li\u003e\n\u003cli\u003e128 KB ROM\u003c\/li\u003e\n\u003cli\u003e320 KB SRAM\u003c\/li\u003e\n\u003cli\u003e16 KB SRAM in RTC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWiFi:\n\u003cul\u003e\n\u003cli\u003e802.11 b\/g\/n\u003c\/li\u003e\n\u003cli\u003eBit rate: 802.11n up to 150 Mbps\u003c\/li\u003e\n\u003cli\u003eA-MPDU and A-MSDU aggregation\u003c\/li\u003e\n\u003cli\u003e0.4 µs guard interval support\u003c\/li\u003e\n\u003cli\u003eCenter frequency range of operating channel: 2412 ~ 2484 MHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eHardware:\n\u003cul\u003e\n\u003cli\u003eInterfaces: GPIO, SPI, LCD, UART, I2C, I2S, Camera interface, IR, pulse counter, LED PWM, USB\u003c\/li\u003e\n\u003cli\u003eOTG 1.1, ADC, DAC, touch sensor, temperature sensor\u003c\/li\u003e\n\u003cli\u003e40 MHz crystal oscillator\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e4 MB SPI flash\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOperating voltage\/Power supply: 3.0 ~ 3.6 V\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: –40 ~ 85 °C\u003c\/li\u003e\n\u003cli\u003eDimensions:\u003cstrong\u003e (18 × 31 × 3.3) mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCertification:\n\u003cul\u003e\n\u003cli\u003eGreen certification: RoHS\/REACH\u003c\/li\u003e\n\u003cli\u003eRF certification: FCC\/CE-RED\/SRRC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eTest:\n\u003cul\u003e\n\u003cli\u003eHTOL\/HTSL\/uHAST\/TCT\/ESD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHuuuuge amount of information on https:\/\/www.esp32.com\/ community forum!\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eDon't forget to visit esp32.com for the latest and greatest in ESP32 news, software and gossip!\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\n\u003cli\u003eModule Datasheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Espressif","offers":[{"title":"Default Title","offer_id":53636181098789,"sku":"oez1787258162125","price":2.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/6251\/1397\/files\/esp32-s2-wroom-module-with-pcb-antenna---4-mb-flash-and-no-psram-4mb-flash_1.jpg?v=1787258170"},{"product_id":"gravity-wifi-iot-module","title":"Gravity: WiFi IoT Module","description":"\u003cdiv class=\"desc\"\u003e\n\u003cdiv class=\"desCon\"\u003eThis WiFi IoT module would be an excellent choice for IoT classroom teaching and smart home projects. It supports multiple programming platforms, such as MakeCode, Mind+, and Arduino IDE, and can also be used on various popular IoT platforms like Easy IoT, IFFTTT, ThingSpeak, SIoT. Besides that, the module is designed with easy-to-use Gravity interface and employs UART and I2C communication protocols. You can use it to build IoT projects with other mainboards like micro:bit, Arduino, STM32, etc.\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eSupport Arduino IDE programming, MakeCode and Mind+ Graphical Programming\u003c\/li\u003e\n\u003cli\u003eI2C and UART Communication\u003c\/li\u003e\n\u003cli\u003eSupport Maincontroller Arduino, micro:bit, etc.\u003c\/li\u003e\n\u003cli\u003eSupport protocols like MQTT, HTTP, etc. Work well with IoT platforms EasyIoT, IFTTT, ThingSpeak, etc.\u003c\/li\u003e\n\u003cli\u003ePH2.0-4P Gravity Interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003ePower Supply: 3.3V~5.5 V\u003c\/li\u003e\n\u003cli\u003eCommunication: I2C, UART\u003c\/li\u003e\n\u003cli\u003eWireless Mode: IEEE802.11b\/g\/n\u003c\/li\u003e\n\u003cli\u003eEncryption Type: WPA WPA2\/WPA2–PSK\u003c\/li\u003e\n\u003cli\u003eWiFi Frequency: 2.4GHz\u003c\/li\u003e\n\u003cli\u003eBuilt-in Protocol: TCP\/IP Protocol Stack\u003c\/li\u003e\n\u003cli\u003eDimension: 37 x 32mm\u003c\/li\u003e\n\u003cli\u003eSupported IoT Platforms: Easy IoT, IFFTTT, ThingSpeak, SIoT\u003c\/li\u003e\n\u003cli\u003eSupported Programming Platforms: Arduino IDE, MakeCode, Mind+\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Wiki\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e1x Gravity: WIFI IoT Module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":53636181131557,"sku":"tmh1787258164185","price":8.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/6251\/1397\/files\/gravity-wifi-iot-module_1.jpg?v=1787258172"},{"product_id":"gravity-i2c-ads1115-16-bit-adc-module","title":"Gravity: I2C ADS1115 16-Bit ADC Module","description":"\u003cdiv class=\"desc\"\u003e\n\u003cdiv class=\"desCon\"\u003eDFRobot I2C ADS1115 16-bit ADC module can accurately collect and convert analog signals. Through this ADC module, Raspberry Pi can easily use a wide range of Gravity series analog sensors to measure various signals, and perceive this world.\u003cbr\u003e\u003cbr\u003e Raspberry Pi is a common master control board which is powerful in its functions, but the I\/O pins of Raspberry Pi can read digital signals only, what's more, only through an external analog-to-digital conversion (ADC) module can it read signals of analog sensor or device, it is not convenient to use.\u003cbr\u003e\u003cbr\u003e DFRobot I2C ADS1115 16-bit ADC module is specially designed for Raspberry Pi and Gravity series analog sensors, which greatly reduces the difficulty of using the Gravity series analog sensors, plug and play, no welding, very convenient. The number of Gravity series sensors is large and its wide variety can meet the needs of various sensors of the Raspberry Pi.\u003cbr\u003e\u003cbr\u003e This module uses 16-bit ADC chip ADS1115, supports 3.3 ~ 5V wide voltage power supply. The chip has a precision reference voltage and programmable gain adjustment (PGA), therefore, accurate acquisition and conversion can be performed for both weak and highly variable signals. So it is also applicable to all types of applications that the main control board needs to accurately collect the analog signals.\u003cbr\u003e\u003cbr\u003e One ADC module can read analog signals of 4 channels. Because of the on-board I2C address selection switch, it supports the cascade of two ADC modules and can read analog signals of 8 channels, it can satisfy the needs of various applications.\u003cbr\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cstrong\u003eNote: The voltage on analog input pins must be less than VCC+0.3V!\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"desCon\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cli\u003eSupport 3.3~5.0V Wide Supply Voltage\u003c\/li\u003e\n\u003cli\u003e3.3V I2C digital level signal, optimized for Raspberry Pi\u003c\/li\u003e\n\u003cli\u003eGravity I2C Interface, plug and play\u003c\/li\u003e\n\u003cli\u003eOn-board I2C address selection switch, supports cascade of two ADC modules\u003c\/li\u003e\n\u003cli\u003eColour-coded 3pin headers, plug and play with Gravity analog sensors\u003c\/li\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"desCon\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"desCon\"\u003eConnection Example - Raspberry Pi 3B\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/I2C_ADS1115_16-Bit_ADC_Module_features_1.jpg?v=1692878828\u0026amp;width=700\"\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cli\u003eSupply Voltage (VCC): 3.3~5.0V\u003c\/li\u003e\n\u003cli\u003eAnalog Signal Detection Range: 0~VCC\u003c\/li\u003e\n\u003cli\u003eNumber of Analog Channels: 4\u003c\/li\u003e\n\u003cli\u003eADC Bits: 16 Bit\u003c\/li\u003e\n\u003cli\u003eOperating Current: 2~3mA (Not include sensor module)\u003c\/li\u003e\n\u003cli\u003eInterface Type: Gravity I2C\u003c\/li\u003e\n\u003cli\u003eInterface Level: High 3.3V, Low 0V\u003c\/li\u003e\n\u003cli\u003eProduct Size: 32mm x 32mm\u003c\/li\u003e\n\u003c\/div\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cli\u003eProduct Wiki\u003c\/li\u003e\n\u003cli\u003eMore Documents\u003c\/li\u003e\n\u003c\/div\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cli\u003e1x Gravity: I2C ADS1115 16-bit ADC Module\u003c\/li\u003e\n\u003cli\u003e1x XH2.54-4pin Header\u003c\/li\u003e\n\u003cli\u003e1x Gravity-4P I2C\/ UART Sensor Wire\u003c\/li\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":53636181164325,"sku":"dzo1787258164144","price":10.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/6251\/1397\/files\/gravity-i2c-ads1115-16-bit-adc-module_1.jpg?v=1787258173"},{"product_id":"wifibee-mt7681-discontinued","title":"WiFiBee-MT7681 [Discontinued]","description":"\u003cp\u003eThe WiFi Bee MT7681 is an Arduino WiFi XBee module based on the MT7681 serial Wi-Fi module. It is compatible with an XBee slot, supports Arduino wireless programming and is ideal for Internet of Things (IoT), home automation and robotics applications.\u003cbr\u003e\u003cbr\u003eThe WiFi Bee supports the IEEE802.11b\/g\/n standard protocols, with 2.4G Wi-Fi bands, 14 channels and WEP\/WPA-PSK\/WPA2-PSK\/TKIP\/AES encryption methods, compatible with many mainstream routers. It has STA and AP working modes, is free to switch, and supports TCP\/IP communications. In addition the WiFi Bee also supports SmartLink intelligent connection. The unit is easy to use - just install the app (Android), and connect to your wireless router.\u003cbr\u003e\u003cbr\u003eThe WiFi Bee has same pin mappings as an XBee. It can be inserted in any device which has an existing XBee socket for full networking capability. For Arduino UNO and Arduino Mega 2560 boards, the WiFi Bee can also be used as a wireless code upload module eliminating the need for a USB cable or physical connection.\u003c\/p\u003e\n\u003cp\u003eThis is very convenient when debugging robots or mobile platforms. In addition the module breakouts include three I\/O ports. Use it as a Wi-Fi remote control - each I\/O supports software PWM outputs. You can configure the parameters using serial AT commands via the serial terminal.\u003c\/p\u003e\n\u003cp\u003eA dedicated breakout board is available here!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eSupport IEEE802.11b\/g\/n Protocol\u003c\/li\u003e\n\u003cli\u003eSupport WEP\/ WPA-PSK\/ WPA2-PSK\/ TKIP\/ AES Multiple Encryption Methods\u003c\/li\u003e\n\u003cli\u003eSupport STA\/ AP Operating Mode\u003c\/li\u003e\n\u003cli\u003eSupport Arduino Wi-Fi Wireless Programming\u003c\/li\u003e\n\u003cli\u003eSupport SmartLink intelligent Connection function\u003c\/li\u003e\n\u003cli\u003eSupport OTA Firmware Upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eMicrocontrollers: MT7681\u003c\/li\u003e\n\u003cli\u003eProtocol Standard: IEEE802.11b \/ g \/ n\u003c\/li\u003e\n\u003cli\u003eWi-Fi Radius: 180m (different environment, different transmission distance)\u003c\/li\u003e\n\u003cli\u003eNumber of channels: 1-14\u003c\/li\u003e\n\u003cli\u003eFrequency range: 2.4-2.4835G\u003c\/li\u003e\n\u003cli\u003eTransmit power: 15-18dbm\u003c\/li\u003e\n\u003cli\u003eEncryption Method: WEP \/ WPA-PSK \/ WPA2-PSK \/ TKIP \/ AES\u003c\/li\u003e\n\u003cli\u003eOperating Mode: STA mode \/ AP mode (STA \u0026amp; AP mixed mode is not supported, only one device can be connected under AP mode)\u003c\/li\u003e\n\u003cli\u003eTCP 1000 port: TCP UART data transparent port\u003c\/li\u003e\n\u003cli\u003eTCP 1001 port: AT command port\u003c\/li\u003e\n\u003cli\u003eUDP 3333 port: broadcast port\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 3.3V\u003c\/li\u003e\n\u003cli\u003eRecommended Input Voltage: 3.3V\u003c\/li\u003e\n\u003cli\u003ePower Consumption: 75 mA\u003c\/li\u003e\n\u003cli\u003eUART serial port: 1\u003c\/li\u003e\n\u003cli\u003eBaud rate: 9600, 14400, 19200, 38400, 57600, 115200bps (default)\u003c\/li\u003e\n\u003cli\u003eDimension: 32 * 24 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 3.5g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eDocuments\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eProduct WIKI \u003c\/li\u003e\n\u003cli\u003eMore Documents\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eShipping List\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eWiFiBee-MT7681 x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":53636181197093,"sku":"jen1787258165109","price":8.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/6251\/1397\/files\/wifibee-mt7681-discontinued_1.jpg?v=1787258173"},{"product_id":"gravity-uart-i2c-nfc-module","title":"Gravity: UART \u0026 I2C NFC Module","description":"\u003cdiv class=\"desc\"\u003e\n\u003cdiv class=\"desCon\"\u003eThis UART \u0026amp; I2C NFC Module adopts NXP PN532, a highly integrated NFC communication controller, which supports various types of NFC smart cards or tags like the commonly used MIFARE Classic series and NTAG series in the market.\u003c\/div\u003e\n\u003cdiv class=\"desCon\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"desCon\"\u003eApart from the large PCB antenna design of better communication area and distance, the upgraded version joins the Gravity family by adopting a standard Gravity PH2.0-4P interface with I2C \u0026amp; UART composite rather than 2.54mm headers, making the wiring more convenient. A switch is added for conveniently switching between these two interfaces. When using the UART, you can easily read and write various NFC cards by using the common USB to UART converter and PN532 compatible PC software. When using the I2C interface, it can be used for various 3V3\/5V controller such as Arduino, micro:bit, FireBeetle ESP32 and FireBeetle ESP8266.\u003c\/div\u003e\n\u003cdiv class=\"desCon\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"desCon\"\u003e\u003cb style=\"font-size: 1.4em;\" data-mce-style=\"font-size: 1.4em;\"\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv class=\"desCon\"\u003e\u003cb style=\"font-size: 1.4em;\" data-mce-style=\"font-size: 1.4em;\"\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul style=\"list-style-type: disc;\" class=\"list-paddingleft-2\" data-mce-style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eNXP highly integrated NFC controller\u003c\/li\u003e\n\u003cli\u003eGravity I2C \u0026amp; UART composite interface, flexible use\u003c\/li\u003e\n\u003cli\u003eSupport various kinds of mainstream NFC smart cards or tags\u003c\/li\u003e\n\u003cli\u003eCompatible with 3.3V\/5V controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConnection Example - DFRduino Uno R3\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/UART_I2C_NFC_Module_features_1.jpg?v=1692875352\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/UART_I2C_NFC_Module_features_1.jpg?v=1692875352\u0026amp;width=700\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul style=\"list-style-type: disc;\" class=\"list-paddingleft-2\" data-mce-style=\"list-style-type: disc;\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul style=\"list-style-type: disc;\" class=\"list-paddingleft-2\" data-mce-style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eIC: NXP PN532\u003c\/li\u003e\n\u003cli\u003eInput Voltage (VCC) : 3.3V~5.5V\u003c\/li\u003e\n\u003cli\u003eInterface: Gravity I2C \u0026amp; UART (PH2.0-4P, Logic Level 0-3.3V)\u003c\/li\u003e\n\u003cli\u003eUART Baud Rate: 115200 bps\u003c\/li\u003e\n\u003cli\u003eI2C Address: 0x48\u003c\/li\u003e\n\u003cli\u003eCommunication Frequency: 13.56 MHz\u003c\/li\u003e\n\u003cli\u003eMaximum Communication Distance: ≥10mm, depending on the size of the NFC card\/tag\u003c\/li\u003e\n\u003cli\u003eProtocol Support:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eReader\/Writer Mode: ISO\/IEC 14443A, ISO\/IEC 14443B, MIFARE, FeliCa\u003c\/li\u003e\n\u003cli\u003eCard Emulation Mode: ISO 14443A\/MIFARE Classic 1K or 4K, FeliCa\u003c\/li\u003e\n\u003cli\u003ePeer-to-Peer: ISO\/IEC18092, ECM340\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul style=\"list-style-type: disc;\" class=\"list-paddingleft-2\" data-mce-style=\"list-style-type: disc;\"\u003e\n\u003cli\u003eDimension: 110 x 50 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 20g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eProduct wiki\u003c\/li\u003e\n\u003cli\u003eMore Documents\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul style=\"list-style-type: disc;\" class=\"list-paddingleft-2\" data-mce-style=\"list-style-type: disc;\"\u003e\n\u003cli\u003e1x Gravity: UART \u0026amp; I2C NFC Module\u003c\/li\u003e\n\u003cli\u003e1x Gravity-4P I2C\/UART Sensor Wire\u003c\/li\u003e\n\u003cli\u003e1x XH2.54-2P Black Header\u003c\/li\u003e\n\u003cli\u003e1x NFC Tag Sticker\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":53636181229861,"sku":"dck1787258165868","price":20.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/6251\/1397\/files\/gravity-uart-i2c-nfc-module_1.jpg?v=1787258174"},{"product_id":"gravity-speech-synthesis-module-v20","title":"Gravity: Speech Synthesis Module V2.0","description":"\u003cp\u003eIf you're interested in adding voice functionality to your projects, this is the module to buy! The module supports both Chinese and English, and can display current time and environmental data. It can be used alongside a speech recognition module for basic interactive conversations. For connectivity, it offers I2C and UART modes and a gravity interface, providing compatibility with many common controllers. Additionally, it includes a built-in speaker, so there's no need to buy one separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: the addresses of the speech synthesis module and micro: bit motor driver board are the same, so they cannot be used together.\u003c\/p\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAs of the 12th of February\u003c\/strong\u003e, these are the upgrades to the newest version of the board.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMore natural pronunciation\u003c\/li\u003e\n\u003cli\u003eFewer pronunciation errors for polyphone characters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSupports Chinese, English, and mixed reading in Chinese and English\u003c\/li\u003e\n\u003cli\u003eComes with a Speaker\u003c\/li\u003e\n\u003cli\u003eGravity I2C\/UART Communication\u003c\/li\u003e\n\u003cli\u003eSupport Multiple Text Control Identifiers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConnection Example - I\/O Expansion Shield V7 with I2C and UART Connections\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/Gravity_Speech_Synthesis_Module_Features_1.jpg?v=1707752363\u0026amp;width=700\"\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePower Supply: 3.3V~5V\u003c\/li\u003e\n\u003cli\u003eOperating Current: \u0026lt;160mA\u003c\/li\u003e\n\u003cli\u003eI2C Address: 0x40\u003c\/li\u003e\n\u003cli\u003eOperating Temperature Range: -40°C~85°C\u003c\/li\u003e\n\u003cli\u003eDimension: 42 x 32mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Wiki\u003c\/li\u003e\n\u003cli\u003eSchematics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePinout\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/Gravity_Speech_Synthesis_Module_Contents_1.jpg?v=1707752595\u0026amp;width=700\"\u003e\u003c\/p\u003e\n\u003ctable width=\"286\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"64\"\u003eNo.\u003c\/td\u003e\n\u003ctd width=\"64\"\u003eLabel\u003c\/td\u003e\n\u003ctd width=\"158\"\u003eDescription\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eD\/T\u003c\/td\u003e\n\u003ctd\u003eI2C data line\/TX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eC\/T\u003c\/td\u003e\n\u003ctd\u003eI2C clock line\/RX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eVCC\u003c\/td\u003e\n\u003ctd\u003e+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003eAOP\u003c\/td\u003e\n\u003ctd\u003eAudio Output Positive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eAON\u003c\/td\u003e\n\u003ctd\u003eAudio Output Negative\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003ePackage Contents\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Gravity: Speech Synthesis module V2.0\u003c\/li\u003e\n\u003cli\u003e1x Gravity-4P I2C\/UART Sensor Connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":53636181262629,"sku":"uvc1787258167958","price":17.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/6251\/1397\/files\/gravity-speech-synthesis-module-v20_1.jpg?v=1787258177"},{"product_id":"gravity-digital-10a-relay-module","title":"Gravity: Digital 10A Relay Module","description":"\u003cdiv class=\"desc\"\u003e\n\u003cdiv class=\"desCon\"\u003eIntroducing the Gravity Digital Relay Module – the latest addition to DFRobot’s Gravity series! This module is a little different to the other relays in our store - not only is it compatible with 5V Arduino boards, but also with Raspberry Pi, BBB (BeagleBoard Black), mbed, Intel Joule, Arduino 101 and other 3.3V devices.\u003cbr\u003e\u003cbr\u003eIt is specially designed for low-voltage devices and works well under 3.3V power supplies, just like the Raspberry Pi relay board. In addition, the module has a wide range of power inputs. In our tests, once it reaches 2.8~5.5V, it can also support 1.8V devices.\u003cbr\u003e\u003cbr\u003eDFRobot’s Digital Relay Module uses a high quality 3V relay. It can handle up to 10A current and mechanical parts are guaranteed up to 100 million uses. An on-board indicator LED demonstrates the relay’s state. Terminals include normally open (NO) and normally closed (NC). The module uses a Gravity-3 pin interface, which requires no soldering for convenient plug and play usage.\u003c\/div\u003e\n\u003cdiv class=\"desCon\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"desCon\"\u003e\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eSupports Arduino, Raspberry Pi, LattePanda etc.\u003c\/li\u003e\n\u003cli\u003e2.8 ~ 5.5V – A wide-range of input voltages\u003c\/li\u003e\n\u003cli\u003eThe underside of board is isolated using an acrylic plate for safety\u003c\/li\u003e\n\u003cli\u003eIncludes an LED Indicator\u003c\/li\u003e\n\u003cli\u003eUses a gravity-3 Pin interface for easy, plug and play usage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 2.8V ~ 5.5V\u003c\/li\u003e\n\u003cli\u003eInput Signal: High Level (≥2.8V); Low Level (≤0.5V)\u003c\/li\u003e\n\u003cli\u003eMax Switching Current: 10A\u003c\/li\u003e\n\u003cli\u003eMax Switching Voltage: 35VAC; 30VDC\u003c\/li\u003e\n\u003cli\u003eRating Load: \u003cspan data-mce-fragment=\"1\"\u003e10A@35VAC\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e; \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e10A@28VDC\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eMax Switching Power: 300W\u003c\/li\u003e\n\u003cli\u003eOperate Time: ≤10ms\u003c\/li\u003e\n\u003cli\u003eRelease Time: ≤5ms\u003c\/li\u003e\n\u003cli\u003eDimensions: 38 x 33 x 20 mm\u003c\/li\u003e\n\u003cli\u003eMechanical Life: 1 million uses\u003c\/li\u003e\n\u003cli\u003eElectrical Life: 50 thousand uses\u003c\/li\u003e\n\u003cli\u003eWeight: 20g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Wiki \u003c\/li\u003e\n\u003cli\u003eMore Documents \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e1x Gravity: Digital Relay Module (with Acrylic Base)\u003c\/li\u003e\n\u003cli\u003e1x Gravity Digital Sensor Cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":53636181295397,"sku":"gcr1787258169440","price":2.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/6251\/1397\/files\/gravity-digital-10a-relay-module_1.jpg?v=1787258178"}],"url":"https:\/\/hypestepstore.shop\/collections\/modules.oembed","provider":"My Store","version":"1.0","type":"link"}