{"title":"Feather","description":"\u003cp\u003eBrowse our Feather collection. New Arrival.\u003c\/p\u003e","products":[{"product_id":"adafruit-213-hd-tri-colour-eink-epaper-display-featherwing-250x122-rw-panel-with-ssd1680","title":"Adafruit 2.13\" HD Tri-Colour eInk \/ ePaper Display FeatherWing (250x122 RW Panel with SSD1680)","description":"\u003cp\u003eEasy e-paper comes to your Feather, with this breakout that's designed to make it a breeze to add a tri-color eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!\u003c\/p\u003e\u003cp\u003eWe've liked these displays for a long time, and they're just about Feather sized, so wouldn't a custom e-paper FeatherWing make a ton of sense?\u003cstrong\u003e This 'Wing is tested to work with \u003cem\u003eall\u003c\/em\u003e of our Feathers\u003c\/strong\u003e, from the ESP8266 to the M0. It has built-in memory buffering so it can work with chips as small as the '32u4 and '328. It \u003cem\u003edoes\u003c\/em\u003e use a lot of pins: the 3 SPI pins, and up to 4 control pins to manage the SD card slot and SRAM.\u003c\/p\u003e\u003cp\u003eThe FeatherWing sports a \u003cstrong\u003e2.13\" tri-color (red, black, and white) display\u003c\/strong\u003e. It has 250x122\u003cstrong\u003e \u003c\/strong\u003eblack and red ink pixels and a white-ish background. We used to stock a version of a 2.13\" tricolor E-Ink with a lower-resolution display,\u003cstrong\u003e this version is 250x122 pixels instead of 212x104 pixels and uses a different chipset (SSD1680) so code will need to be recompiled.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUsing our CircuitPython or Arduino libraries, you can create a 'frame buffer' with what pixels you want to have activated and then write that out to the display. Most simple breakouts leave it at that. But if you do the math, 250 x 122 pixels x 2 colors = 7.5 KBytes. Which won't fit into many microcontroller memories. Heck, even if you do have 32KB of RAM, why waste 8KB?\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSo we did you a favor and tossed a small SRAM chip on the back.\u003c\/strong\u003e This chip shares the SPI port the eInk display uses, so you only need one extra pin. And, no more frame-buffering! \u003cstrong\u003eYou can use the SRAM to set up whatever you want to display, then shuffle data from SRAM to eInk when you're ready. The library we wrote does all the work for you\u003c\/strong\u003e, you can just interface with it as if it were an Adafruit_GFX compatible display.\u003c\/p\u003e\u003cp\u003eWe even tossed on a MicroSD socket so you can store images, text files, whatever you like to display. Comes assembled and tested with socket headers that you can plug your Feather right into, no soldering required!\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (excluding mounting holes): 61.5mm x 31.4mm x 6.6mm\u003c\/li\u003e\n\u003cli\u003eDriver chip is the SSD1680\u003c\/li\u003e\n\u003cli\u003ePanel variant is RW\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProduct Weight: 14.5g \/ 0.5oz \u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53636186308901,"sku":"vvi1787258217420","price":17.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/6251\/1397\/files\/adafruit-213-hd-tri-colour-eink-epaper-display-featherwing-250x122-rw-panel-with_1.jpg?v=1787258226"},{"product_id":"adafruit-29-grayscale-eink-epaper-display-featherwing-4-level-grayscale","title":"Adafruit 2.9\" Grayscale eInk \/ ePaper Display FeatherWing (4 Level Grayscale)","description":"\u003cp\u003eEasy e-paper comes to your Feather with this breakout that's designed to make it a breeze to add a monochrome eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!\u003c\/p\u003e\u003cp\u003eWe've liked these displays for a long time, so wouldn't a custom e-paper FeatherWing with buttons make a ton of sense?\u003cstrong\u003e This 'Wing is tested to work with \u003cem\u003eall\u003c\/em\u003e of our Feathers\u003c\/strong\u003e, from the ESP8266 to the M0. It has built in memory buffering so it can work with chips as small as the '32u4 and '328. It \u003cem\u003edoes\u003c\/em\u003e use a lot of pins: the 3 SPI pins, and up to 4 control pins to manage the SD card slot and SRAM. Plus 3 optional buttons are available for Feathers with available pins.\u003c\/p\u003e\u003cp\u003eThe FeatherWing sports a \u003cstrong\u003e2.9\" grayscale display\u003c\/strong\u003e\u003cstrong\u003e with 296x128 pixels\u003c\/strong\u003e. Each pixel can be white, light gray, dark gray or black. Compared to 'tri-color' displays with a red pigment, this display takes a lot less time to update, only about a second instead of 15 seconds!\u003c\/p\u003e\u003cp\u003eUsing our CircuitPython or Arduino libraries, you can create a 'frame buffer' with what pixels you want to have activated and then write that out to the display. Most simple breakouts leave it at that. But if you do the math, 296 x 128 pixels x 2-bits-per-pixel = 9.5 KBytes. Which won't fit into many microcontroller memories. Heck, even if you do have 32KB of RAM, why waste 9KB?\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSo we did you a favor and tossed a small SRAM chip on the back.\u003c\/strong\u003e This chip shares the SPI port the eInk display uses, so you only need one extra pin. And, no more frame-buffering! \u003cstrong\u003eYou can use the SRAM to set up whatever you want to display, then shuffle data from SRAM to eInk when you're ready. The library we wrote does all the work for you\u003c\/strong\u003e, you can just interface with it as if it were an Adafruit_GFX compatible display.\u003c\/p\u003e\u003cp\u003eWe even tossed on a MicroSD socket so you can store images, text files, whatever you like to display. Comes assembled and tested with socket headers that you can plug your Feather right into, no soldering required!\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck out the tutorial page for Arduino and CircuitPython example code and libraries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003e\u003cstrong\u003eCheck out the tutorial page for Arduino and CircuitPython example code and libraries\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePCB Dimension (excluding mounting holes): 79.5mm x 38mm x 6.8mm \u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 2.5mm \u003c\/li\u003e\n\u003cli\u003eMounting hole dimensions: 74.3mm x 42mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProduct Weight: 22.0g \/ 0.8oz \u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53636186538277,"sku":"qcu1787258218346","price":15.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/6251\/1397\/files\/adafruit-29-grayscale-eink-epaper-display-featherwing-4-level-grayscale_1.jpg?v=1787258226"},{"product_id":"feather-click-shield-by-mikroelektronika-discontinued","title":"Feather Click Shield by MikroElektronika [Discontinued]","description":"\u003cp\u003eMikroElektronika's \u003cstrong\u003eFeather Click Shield \u003c\/strong\u003ewill expand your Feather projects to \"fly\" with more than 750 Click boards available from MikroE. This coterie of Click boards gives you a versatile selection of peripheral devices that can be taken off the shelf and used for prototyping in no time. The shield is designed with two proprietary mikroBUS sockets, allowing all the Click board devices to be interfaced with the Feather boards. It is enough to place an add-on board of your choice on the top of the mikroBUS socket - and click it in. Hence why this add-on board is called Click board - it just \u003cem\u003eclicks!\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: You should avoid adding Click boards with 5V logic output since these boards potentially can damage input pin 3 on your Feather. MikroElektronika does not appear to offer Python, Circuit\/MicroPython, or Arduino libraries for their Click boards. That means you will have to either adapt\/port their C libraries or find libraries for each Click and figure out any pinouts.\u003c\/p\u003e\n\u003cp\u003eFeather main board is not included, this is just the Click Shield. Click boards aren't included either - you can order them from Mikro!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cul\u003e\n\u003cli\u003eFor more information, diagrams, pinouts, and more, check out MikroElektronika\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProduct Dimensions: 96.0mm x 72.2mm x 17.2mm \/ 3.8\" x 2.8\" x 0.7\"\u003c\/p\u003e\n\u003cp\u003eProduct Weight: 36.5g \/ 1.3oz\u003c\/p\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"MikroElektronika","offers":[{"title":"Default Title","offer_id":53636186931493,"sku":"iiu1787258219555","price":18.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/6251\/1397\/files\/feather-click-shield-by-mikroelektronika-discontinued_1.jpg?v=1787258228"},{"product_id":"adafruit-29-tri-color-eink-epaper-display-featherwing-red-black-white","title":"Adafruit 2.9\" Tri-Color eInk \/ ePaper Display FeatherWing (Red Black White)","description":"\u003cp\u003eEasy e-paper comes to your Feather with this breakout that's designed to make it a breeze to add a tri-color eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!\u003c\/p\u003e\u003cp\u003eWe've liked these displays for a long time, so wouldn't a custom e-paper FeatherWing with buttons make a ton of sense?\u003cstrong\u003e This 'Wing is tested to work with \u003cem\u003eall\u003c\/em\u003e of our Feathers\u003c\/strong\u003e, from the ESP8266 to the M0. It has built-in memory buffering so it can work with chips as small as the '32u4 and '328. It \u003cem\u003edoes\u003c\/em\u003e use a lot of pins: the 3 SPI pins, and up to 4 control pins to manage the SD card slot and SRAM. Plus 3 optional buttons are available for Feathers with available pins.\u003c\/p\u003e\u003cp\u003eThe FeatherWing sports a \u003cstrong\u003e2.9\" tri-color (red, black, and white) display with 296x128 pixels \u003c\/strong\u003ewith black and red ink pixels and a white-ish background. Using our CircuitPython or Arduino libraries, you can create a 'frame buffer' with what pixels you want to have activated and then write that out to the display. Most simple breakouts leave it at that. But if you do the math, 296 x 128 pixels x 2-bits-per-pixel = 9.5 KBytes. Which won't fit into many microcontroller memories. Heck, even if you do have 32KB of RAM, why waste 9KB?\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSo we did you a favor and tossed a small SRAM chip on the back.\u003c\/strong\u003e This chip shares the SPI port the eInk display uses, so you only need one extra pin. And, no more frame-buffering! \u003cstrong\u003eYou can use the SRAM to set up whatever you want to display, then shuffle data from SRAM to eInk when you're ready. The library we wrote does all the work for you\u003c\/strong\u003e, you can just interface with it as if it were an Adafruit_GFX compatible display.\u003c\/p\u003e\u003cp\u003eWe even tossed on a MicroSD socket so you can store images, text files, whatever you like to display. Comes assembled and tested with socket headers that you can plug your Feather right into, no soldering required!\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003cul\u003e\n\u003cli\u003ePCB Dimension (excluding mounting holes): 79.5mm x 38mm x 6.8mm \u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 2.5mm \u003c\/li\u003e\n\u003cli\u003eMounting hole dimensions: 74.3mm x 42mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53636187128101,"sku":"fvi1787258221634","price":15.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/6251\/1397\/files\/adafruit-29-tri-color-eink-epaper-display-featherwing-red-black-white_1.jpg?v=1787258230"},{"product_id":"smt-socket-header-kit-for-featherwings","title":"SMT Socket Header Kit for FeatherWings","description":"\u003cp\u003eThese two \u003cstrong\u003eSMT Socket Headers\u003c\/strong\u003e alone are, well, lonely. But pair them with any of our Feather boards and you're in business!\u003c\/p\u003e\n\u003cp\u003eThese headers are particularly cute and slim and are designed to match with FeatherWings. It's harder to solder than thru-hole type headers, but for reflow-friendly builds these headers are recommended! We use these on all types of 'Wings, from the CRICKIT FeatherWing to eInk\/ePaper displays to TFT Touchscreens!\u003c\/p\u003e\n\u003cp\u003eCheck out all of our Feather boards, FeatherWings, and Feather accessories here!\u003c\/p\u003e\n\u003cp\u003eNote: Comes with one 12-pin and one 16-pin header. 'Wings not included.\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cul id=\"product-files\"\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53636187160869,"sku":"mxu1787258223768","price":1.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/6251\/1397\/files\/smt-socket-header-kit-for-featherwings_1.jpg?v=1787258231"},{"product_id":"gameduino-3x-dazzler-for-feather-m4-by-excamera-labs-discontinued","title":"Gameduino 3X Dazzler for Feather M4 by Excamera Labs [Discontinued]","description":"\u003cp\u003e\u003cstrong\u003eThe Gameduino 3X Dazzler\u003c\/strong\u003e is an Adafruit Feather M4-compatible underwing that outputs HD picture and sound to any HDMI display or TV.\u003c\/p\u003e\n\u003cp\u003eThe Dazzler is ideal for game designers using CircuitPython, makers who want rich, responsive data and text visualizations, and anyone who wants superb visuals for their CircuitPython project.\u003c\/p\u003e\n\u003cp\u003eThe graphics and sound are generated by a powerful BT815 EVE embedded GPU. The shield also has two Wii Classic ports for a plug-and-play game console. With an easy-to-use graphics drawing API and dozens of samples and demos to use as starting points, it’s by far the most powerful Python-powered gaming system available today. There's documentation and examples for using the 'bteve` library, a C-accelerated SPI interface library for the graphics co-processor.\u003c\/p\u003e\n\u003cp\u003eEvery aspect of the design is open source and hackable:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ethe PCB design\u003c\/li\u003e\n\u003cli\u003ethe Verilog code for the HDMI, J1 CPU, and system peripherals\u003c\/li\u003e\n\u003cli\u003ethe J1 CPU running on the FPGA\u003c\/li\u003e\n\u003cli\u003ethe J1's firmware that drives the Dazzler's extra features\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe board itself has additional \"hacking\" interfaces: a JTAG port for FPGA reloading, and a UART header for direct chat with the onboard FPGA. Its unique combination of tightly coupled GPU and FPGA opens up new creative possibilities. As a truly open platform, the Dazzler can be anything you want it to be.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: This board is only for use with the Feather M4 Express, and you cannot solder stacking headers into the Feather - just use the regular headers that are included with the M4 Feather!\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003ch2 id=\"features-specifications\"\u003eFeatures \u0026amp; Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPU\u003c\/strong\u003e: BT815 1.1 gigapixel\/s embedded GPU with 8 Mbyte flash\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFPGA\u003c\/strong\u003e: Xilinx Spartan-6 LX9 FT256 with 8 Mbyte flash\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo output\u003c\/strong\u003e: HDMI 24-bit at 1280x720 (720p) with 48 KHz stereo audio\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage\u003c\/strong\u003e: microSD slot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtra input\u003c\/strong\u003e: two Wii Classic controller ports\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForm-factor\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003eGameduino 3X Dazzler is an Feather-compatible dev board\u003c\/li\u003e\n\u003cli\u003eThe shield includes the Dazzler Core, which is an SMD module that includes GPU, FPGA, and HDMI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware interfaces\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003eStandard SPI up to 36 MHz for CircuitPython communication\u003c\/li\u003e\n\u003cli\u003eUART up to 1 Mbps for FPGA connection\u003c\/li\u003e\n\u003cli\u003eJTAG for FPGA reloading\u003c\/li\u003e\n\u003cli\u003eAll inputs are 5 V tolerant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProgramming\u003c\/strong\u003e: Gameduino library for CircuitPython. Lots of examples.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal mode\u003c\/strong\u003e: functions as an ANSI terminal with high-speed UART\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent consumption (typical)\u003c\/strong\u003e: 180 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: 83mm x 53mm x 20mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003ePCB layouts\u003c\/li\u003e\n\u003cli\u003eBoard firmware\u003c\/li\u003e\n\u003cli\u003eGameduino 2 library application layer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProduct Dimensions: 83.0mm x 53.0mm x 20.0mm \/ 3.3\" x 2.1\" x 0.8\"\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53636187193637,"sku":"skb1787258224742","price":36.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/6251\/1397\/files\/gameduino-3x-dazzler-for-feather-m4-by-excamera-labs-discontinued_1.jpg?v=1787258232"},{"product_id":"neokey-featherwing-two-mechanical-key-switches-with-neopixels","title":"NeoKey FeatherWing - Two Mechanical Key Switches with NeoPixels","description":"\u003cp\u003eThe only thing better than a nice mechanical key, is two of them, and ones that also can glow any color of the rainbow - and that's what the \u003cstrong\u003eAdafruit NeoKey FeatherWing \u003c\/strong\u003ewill let you do! This Wing plugs into any\/all Feather main boards and can fit two \u003cstrong\u003eCherry MX or compatible switches \u003c\/strong\u003eto turn your Feather into the lil'est macro keypad.\u003c\/p\u003e\n\u003cp\u003eEach Wing has two Kailh sockets, which means you can plug in any MX-compatible switches instead of soldering them in. You may need a little glue to keep the switches in place: hot glue or a dot of epoxy worked fine for us.\u003c\/p\u003e\n\u003cp\u003eCheck out all of our Cherry MX compatible keys, caps, boards and more!\u003c\/p\u003e\n\u003cp\u003eBeneath each switch is a reverse-mount NeoPixel pointing up through the spot where many switches would have an LED to shine though. The two pixels are chained together so you can control them as one 2-pixel NeoPixel strand.\u003c\/p\u003e\n\u003cp\u003eWe wired the switches up very simply, so you can use with any Feather. There's jumper pads you can cut to re-wire the switches and LED strand.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch A\u003c\/strong\u003e - Connects to the Feather pin to the left of SCL, on most Feathers this is pin D5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch B\u003c\/strong\u003e - Connects to the Feather pin two pins to the left of SCL, on most Feathers this is pin D6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeoPixel Input \u003c\/strong\u003e- Connects to the Feather pin three pins to the left of SCL, on most Feathers this is pin D9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonus STEMMA QT connector \u003c\/strong\u003eallows you to make solderless connections between your Wing and a wide range of other sensors and accessories using a \u003cstrong\u003ecompatible cable\u003c\/strong\u003e. QT Cable is not included, but we have a variety in the shop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note,\u003c\/strong\u003e \u003cstrong\u003eeach order comes with one assembled FeatherWing PCB and a two sticks of break-off header. \u003c\/strong\u003eSoldering is required to attach the header and connect to a Feather. Two mechanical switches and key caps \u003cstrong\u003eare not included\u003c\/strong\u003e! Use any MX-compatible switch: Kailh, Gateron, etc all work.\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Dimensions: 50.0mm x 23.2mm x 5.2mm \/ 2.0\" x 0.9\" x 0.2\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53636187259173,"sku":"yvo1787258226360","price":3.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/6251\/1397\/files\/neokey-featherwing---two-mechanical-key-switches-with-neopixels_1.jpg?v=1787258234"}],"url":"https:\/\/hypestepstore.shop\/collections\/feather.oembed","provider":"My Store","version":"1.0","type":"link"}